Solar panels can produce plenty of electricity during the day. The problem is that many homes use more power in the evening, when solar output has dropped.
A home battery can help solve this problem.
Battery storage lets you keep some of the solar power you do not use straight away. You can then use that stored energy later. This may reduce the amount of electricity you need to buy from the grid.
For homeowners, this can mean better use of rooftop solar and more control over household energy.
But a battery is a major purchase. Before installing one, it is important to understand how it works, what it can do and whether it suits your home.

A home battery is an energy storage system installed at a residential property.
It stores electricity so it can be used later.
When paired with rooftop solar, the battery can charge when the panels are producing more electricity than the home needs.
Instead of sending all unused solar power to the grid, some of that energy can be stored.
Later, the battery can supply electricity to the home.
A typical residential solar battery system may include:
The exact setup will depend on the battery, solar system and electrical installation.
The basic process is quite simple.
During a sunny part of the day, your solar panels may generate more electricity than your home is using.
Without a battery, much of this extra solar power may be exported to the electricity grid.
With a battery, some of it can be stored instead.
When solar production falls later in the day, the home can draw electricity from the battery. Once the battery reaches its set discharge limit, the home will normally draw electricity from the grid.
The result is that more of your own solar energy can be used within your home.
Home battery storage Australia-wide has gained more attention as households look for ways to use more of their solar power.
There are several reasons for this.
Solar panels usually produce the most electricity around the middle of the day.
However, household demand can rise in the morning and evening.
A battery helps move some of your daytime solar power to the hours when you need it.
This is known as increasing solar self-consumption.
Using stored solar energy means you may buy less electricity from your retailer.
The savings will depend on your energy use, electricity plan, solar production and battery setup.
The Australian Government's Cheaper Home Batteries Program provides support for eligible battery installations connected to new or existing rooftop solar.
The program operates through the Small-scale Renewable Energy Scheme.
Eligibility and the level of support can change over time. Under the current program rules, an eligible solar battery system must have a nominal capacity of at least 5 kWh and no more than 100 kWh. Small-scale technology certificates, or STCs, can only be claimed for the first 50 kWh of usable battery capacity. From 1 May 2026, the STC factor also tapers as battery capacity increases
Homeowners should check the current program rules before making a purchase.
Some batteries can provide power during a blackout, but this is not automatic for every system.
The battery and electrical system must be designed for backup operation.
A system may also be set up to supply only selected circuits during an outage.
For example, a homeowner may choose to keep essential items running, such as:
Large appliances may not be included in the backup supply.
If blackout protection is important to you, discuss it before choosing your battery. The system needs to be designed with your backup needs in mind.
The phrase energy independence with solar batteries can sometimes give the wrong impression.
Installing a battery does not always mean a home can disconnect from the grid.
Most suburban solar and battery systems remain grid-connected.
Instead, a battery can provide greater energy independence by reducing how much electricity the household needs to buy from the grid.
How much independence you gain will depend on factors such as:
| Factor | Why It Matters |
| Solar system size | Affects how much solar energy you can generate |
| Battery capacity | Determines how much energy can be stored |
| Household usage | Changes how quickly stored power is used |
| Time of energy use | Affects when solar and battery power are needed |
| Seasonal conditions | Solar generation changes during the year |
A household with high night-time electricity use may need a different system from a home that uses most of its power during the day.
Bigger is not always better.
A battery should be sized around how your household actually uses electricity.
An oversized battery may not fully charge on many days. An undersized battery may run out of stored energy early in the evening.
Before choosing a system, it helps to review your electricity bills and solar generation data.
A professional assessment should consider:
Future needs can also matter.
You may plan to install an EV charger, replace gas appliances with electric options, or add air conditioning. These changes could increase household electricity use.
A battery can reduce the amount of grid electricity you buy, but the financial result will be different for every household.
The Australian Government advises homeowners to weigh the costs and benefits carefully. For some households, the savings from a battery may not recover its full cost within the battery's warranty period.
Your result may depend on your electricity tariff, battery cost, solar output and energy use.
For this reason, homeowners should be careful with claims about fixed savings or guaranteed payback periods.
A good quote should explain the expected performance using your household's actual energy data.
Modern batteries often include monitoring tools.
These can show:
Some systems can also respond to electricity tariffs or other energy settings.
This gives homeowners more information about where their electricity comes from and when they use it.
To claim STCs under the Cheaper Home Batteries Program, a grid-connected battery system must be technically capable of participating in a Virtual Power Plant, or VPP. This gives the homeowner the option to join a VPP, but participation is not required.
A Virtual Power Plant, or VPP, connects compatible solar and battery systems so they can be coordinated through software. Depending on the VPP program, batteries may charge or discharge at certain times to support the electricity network.
Having a VPP-capable battery does not mean you must join a VPP.
In many cases, yes.
A battery can often be added to an existing rooftop solar system. However, the existing equipment needs to be checked first.
An installer may need to assess the:
Some existing solar systems may need changes before a battery can be added.
It is worth checking compatibility before choosing a battery.
Home battery systems contain a large amount of stored energy, so correct installation is important.
Battery location must be carefully planned. The installer needs to consider the battery type, surrounding materials, access, clearances and other safety requirements.
Battery installations must meet applicable electrical safety laws and standards. These include AS/NZS 5139:2019, including Amendment 1:2025, which covers the safety of battery systems used with power conversion equipment.
The wider electrical installation must also meet applicable requirements of AS/NZS 3000:2018, including current amendments.
Where applicable, grid-connected inverter energy systems must also meet AS/NZS 4777.1:2024 and the current requirements of AS/NZS 4777.2:2020, including applicable amendments, as well as the requirements of the local electricity network.
Battery electrical work must be carried out by appropriately licensed electrical workers. For an installation claiming STCs under the Small-scale Renewable Energy Scheme, the battery must also be installed by a Solar Accreditation Australia accredited installer with the required battery accreditation.
In South Australia, electrical work must also be certified using an electronic Certificate of Compliance, or eCoC.
A battery should suit your home rather than simply being the largest system available.
Before making a decision, ask:
How much solar power do I currently export?
This can help show how much excess solar may be available to charge a battery.
How much electricity do I use after sunset?
Evening and overnight use can help determine a suitable battery capacity.
Do I need blackout backup?
If so, make sure the proposed system is designed to provide it.
Can my existing solar system support the battery?
Compatibility should be checked before installation.
What warranty applies?
Check the battery warranty, operating conditions and any limits that may apply.
Am I eligible for current incentives?
Government programs and eligibility rules can change, so check current requirements when requesting quotes.
There is no single answer.
A battery may make sense for a household with rooftop solar and plenty of excess daytime generation. It may also appeal to homeowners who want greater control over their energy use or suitable backup power.
For another household, the cost may outweigh the expected financial benefit.
The best starting point is your own energy use.
Review how much electricity you consume, when you use it and how much solar power you currently export. This information can help determine whether battery storage is a good fit.
Home batteries are changing how Australian households use rooftop solar.
Instead of relying only on solar power while the sun is shining, a battery can store excess energy for use later. This can increase solar self-consumption, reduce grid electricity use and provide backup power when the system is designed for it.
However, energy independence with solar batteries starts with the right system design. Battery size, solar generation, household demand and future energy needs should all be considered before installation.
At Clean Power Electrical Group, we provide residential solar and battery solutions for homeowners across Adelaide and South Australia. Our team can assess your existing solar system, household energy use and future needs to help you understand your battery storage options.
Call Clean Power Electrical Group on 08 8398 1458 to discuss home battery storage and arrange a consultation.




